| Monitoring distance | Visible light | 1000m |
| Thermal imaging | object | Human(1.8m×0.5m) | Vehicle(2.3m×2.3m) |
| Detection distance | 1200m | 3300m |
| Recognition distance | 600m | 820m |
| Identification distance | 150m | 400m |
| Camera and video coding | Sensor type | 1/2.8" Progressive Scan CMOS |
| Total pixels | 2.1 MP |
| Lens focal length | f=4.5~135mm,30* optical zooming |
| Camera control | Auto gain control, auto white balance, auto backlight compensation, supporting manual and auto day and night mode switch |
| Coding format | H.264 |
| Video resolution | 1920x1080 |
| Video frame rate | 1~30F/S |
| Image adjustment | brightness, contrast ratio, saturation |
| Thermal imaging camera | Detector type | uncooled microbolometer focal plane array(α-si) |
| Effective pixels | 384×288 |
| Spectral range | 8~14μm |
| Temp sensitivity | ≤[email protected],300K |
| Focal length | 50mm |
| FOV | 11.0°×8.2° |
| Frame rate | 25Hz |
| Lens control | Electric focusing(auto focusing optional) |
| Image processing | DDE, pseudo color |
| Pan-tilt | Angle | Horizontal 360°continuous rotation,pitching -90°~+90° |
| speed | Horizontal 0°~50°/s,pitching 0°~50°/s |
| Preset bits | Max 128 |
| Cruising | 6cruising paths,20 bits each path |
| Anti-lightning | TVS 6000V |
| Interface | Power supply interface | DC12V |
| Network interface | 1×10Base-T/100Base-TX,RJ45 |
| Other interfaces | RS485,BNC video output |
| Environment indicators | Working temp | -25ºC~+55ºC |
| Storage temp | -40ºC~+65ºC |
| Relative humidity | 10%~90% |
| Anti-salt fog | continuous spraying for 48 hours at PH 6.5-7.2,surface with no changes |
| Protection grade | IP66 |
| Power supply | Whole machine power supply | DC12V,appendant 220VAC~12VDC/3A water proof power supply |
| Whole machine power consumption | ≤30W |
| Physical features | Whole machine weight | 7.5kg |
| Installation method | Outdoor pedestal mounting |